top of page


SSK protection theory

As long as there are sunlight, water, and oxygen on the earth, deterioration and oxidation of substances will occur over time.

As a method of protecting substances from them, fats of plants and petroleums, or using them as raw materials

Apply so-called "wax" with paint or dye to prevent oxidation of the material.

It is common to do "maintenance".

The paint not only prevents oxidation, but also has the effect of improving the aesthetics by decorating the material.

It's really rational for long-term protection.

In addition, wax is used on the coated surface for the purpose of further preventing oxidation and stains.

Maintenance is often done. In other words, in the sense of protecting substances

Wax is inseparable even if it is cut.

However, if the maintenance method that uses the wax is done in the wrong cycle,

On the contrary, it promotes dirt, and if left as it is, the material will deteriorate and oxidize.

It may promote it.

Generally, the average life of wax applied to a material is about 3 to 6 months.

It has been with.

If left without any maintenance for a longer period, the wax itself will

It oxidizes and becomes dirty, and it is only harder to remove the dirt than when nothing is applied.

When you put a lot of effort into removing dirt, the material may be scratched instead.

It is said.

And there are important facts that are not so commonly known about applying wax.

That is, "it is easier to get dirty with wax than without wax ."

This means that wax is often used to keep the material clean without deteriorating it.

It means that you have to repeat painting and peeling.

In recent years, "coating" has become a maintenance method to solve such problems.

It has attracted attention and is already becoming the mainstream as a maintenance method for painted surfaces.

There is. What is coating? A thin film is applied to the material for a certain period of time without damaging the texture of the material.

Form a strong film.

Also, unlike wax, the coating agent crosslinks (becomes a film) and the surface hardens.

It has the property of being hard to get dirty, and it is a mechanism that can easily wipe off the attached dirt.

It has become.

SSK Protect uses this coating concept not only for hard coated surfaces, but also for soft ones.

We have been researching and developing for many years to see if we can do it for painted surfaces and materials. With its representative things

There are materials such as leather, vinyl, paper, cloth and rubber. By coating there, scratches will occur

It's hard to get in, it's hard to get dirty, and even if it gets dirty, it can be easily wiped off.

As a result of trying to mix and use all kinds of materials to see if the maintenance method can be applied

I came up with one definition. It is by making the film follow the material, "Durability is outstanding.

It was an experimental result that "improves to."



In other words, it does not mean that "hardening the film = high durability".

Technology that establishes antifouling property and scratch prevention power by cross-linking a liquid agent that does not harden and making it follow the material

SSK Protect's original technology "Two-component coating protection method (patented 2016-007116)"

It is.

Once applied, it becomes a technology that can protect soft materials for a long time (≈ about 3 years), leather, vinyl,

For paper, cloth, and rubber , it is said to be a very rational and new maintenance method that has never been seen before.


bottom of page